Features an MBR technology, high efficiency removal of pollutants MBR of suspended solids and turbidity removal has a very good effect. Because membrane pore size of the membrane is very small (0.01 to 1 Xie) can be inside the bioreactor all suspended solids and sludge are trapped down, its solid-liquid separation is much better than the secondary settling tank, MBR on the SS removal of more than 99%, even up to 100%; turbidity is also more than 90 percent, similar to water turbidity and water. Since efficient interception of the membrane module, all the activated sludge are trapped within the reactor, so that the sludge concentration in the reactor can reach a higher level of up to 40 ~ 50g / L. This greatly reduces the load of bioreactor sludge and improve the MBR supply of organic matter removal efficiency of MBR membrane separator, the average COD removal of sewage in more than 94%, the average BOD removal efficiency of 96% the above. Meanwhile MBR membrane separator, due to separation membrane module, making biological reactor hydraulic retention time (HRT) and sludge retention time (SRT) are completely separate, so you can make slow growth, long generation time microorganisms (such as nitrification bacteria) can survive in the reactor, in addition to ensuring the MBR is an efficient role in degradation of organic matter, but also has good nitrification. Studies have shown that, MBR when dealing with sewage, ammonia nitrogen removal rate of more than 98% on average, effluent ammonia concentrations below 1mg / L. Furthermore MBR membrane separator type, select the appropriate membrane pore size after, MBR bacteria and viruses also has a good removal, thus eliminates the need for conventional treatment processes disinfection process, greatly simplifying the process. In addition, at low DO concentration, the presence of anoxic or anaerobic MBR membrane separator inside zoogloea, create the conditions for denitrification. Using only aerobic MBR process, although TP removal efficiency is not high, but if it is combined with anaerobic, can greatly improve the removal rate of TP. Studies have shown that the use of A / O MBR hybrid technology, the TP removal up to 70%. The main purpose of the ultrafiltration system to replace the use of traditional reverse osmosis pretreatment system pretreatment to remove suspended solids in raw water, colloids, bacteria, turbidity, organic matter, etc., to ensure the normal operation of the reverse osmosis. Select the appropriate pretreatment process, we can reduce fouling, fouling and membrane degradation, thereby significantly improve system performance and achieve system water production, desalination, recovery and optimization of operating costs. As the use of ultrafiltration pretreatment of reverse osmosis systems can adapt to a wide range of changes in water quality, water quality is good and stable production. The use of ultrafiltration can more effectively protect the reverse osmosis unit, reverse osmosis membrane from contamination, while improving the design of the reverse osmosis membrane water flux. Ultrafiltration membrane separation technology, small footprint, good water quality, high degree of automation. MBR membrane separator manufacturers | Nanjing MBR membrane separator | Jun Xin environmental technology provided by the Environmental Protection Technology Co., Ltd. Nanjing Jun Xin. Nanjing Environmental Protection Technology Co., Ltd. Jun Xin (www.jxhb880.com) strong, credible, in Nanjing sewage treatment equipment industry has accumulated a large number of loyal customers. The company better work attitude and constantly improving innovative ideas will lead Chun-hsin environmental technology and you hand into the brilliant, for a better future!